Solid Propellants


 

Rocket Propellants

1) Liquid Propellants

2) Solid Propellants

3) Hybrid Propellants

 

Solid propellant motors are the simplest of all rocket designs. They consist of a casing, usually steel, filled with a canadian pharmacy viagra mixture of solid compounds (fuel and oxidizer) that burn at a rapid rate, expelling hot gases from a nozzle to produce thrust. When ignited, a solid propellant burns from the center out towards the sides of the casing. The shape of the center channel determines the rate and pattern of the burn, thus providing a means to control thrust. Unlike liquid propellant engines, solid propellant motors cannot be shut down. Once ignited, they will burn until all the propellant is exhausted. There are two families of solids propellants: homogeneous and composite. Both types are dense, stable at ordinary temperatures, and easily storable.  Homogeneous propellants are either simple base or double base. A simple base propellant consists of a single compound, usually nitrocellulose, which has both an oxidation capacity and a reduction capacity. Double base propellants usually consist of nitrocellulose and nitroglycerine, to which a plasticiser is added. Homogeneous propellants do not usually have specific impulses greater than about 210 seconds under normal conditions. Their main asset is that they do not produce traceable fumes and are, therefore, commonly used in tactical weapons. They are also often used to perform subsidiary functions such as jettisoning spent parts or separating one stage from another.  Modern composite propellants are heterogeneous powders (mixtures) that use a crystallized or finely ground mineral salt as an oxidizer, often ammonium perchlorate, which constitutes between 60% and 90% of the mass of the propellant. The fuel itself is generally aluminum. The propellant is held together by a polymeric binder, usually polyurethane or polybutadienes, which is also consumed as fuel. Additional compounds are sometimes included, such as a catalyst to help increase the burning rate, or other agents to make the powder easier to manufacture. The final product is rubber like substance with the consistency of a hard rubber eraser.  Composite propellants are often identified by the type of polymeric binder used. The two most common binders are polybutadiene acrylic acid acrylonitrile (PBAN) and hydroxy-terminator polybutadiene (HTPB). PBAN formulations give a slightly higher specific impulse, density, and burn rate than equivalent formulations using HTPB. However, PBAN propellant is the more difficult to mix and process and requires an elevated curing temperature. HTPB binder is stronger and more flexible than PBAN binder. Both PBAN and HTPB formulations result in propellants that deliver excellent performance, have good mechanical properties, and offer potentially long burn times.  Solid propellant motors have a variety of uses. Small solids often power the final stage of a launch vehicle, or attach to payloads to boost them to higher orbits. Medium solids such as the Payload Assist Module (PAM) and the Inertial Upper Stage (IUS) provide the added boost to place satellites into geosynchronous orbit or on planetary trajectories.   The Titan, Delta, and Space Shuttle launch vehicles use strap-on solid propellant rockets to provide added thrust at liftoff. The Space Shuttle uses the largest solid rocket motors ever built and flown. Each booster contains 500,000 kg (1,100,000 pounds) of propellant and can produce up to 14,680,000 Newtons (3,300,000 pounds) of thrust.


This entry was posted in Rocket Propellants and tagged , , , , , , , , . Bookmark the permalink.

Leave a Reply